Using Starlink with a 3rd Party Router and 12/24V Conversion

Starlink is the revolutionary satellite internet service that provides high-speed, low-latency internet access to users worldwide. While Starlink offers its own router, many users prefer to use third-party routers for enhanced functionality (or even basic functionality) and customization. This article will discuss using Starlink with a third-party router, especially in conjunction with a Starlink 12/24V conversion adapter.

Tested and Known Good Working Routers

Here are some routers that we or our customers tested. If not noted otherwise, the Starlink app keeps working out of the box.

• GL.iNET AXT1800
• GL.iNET MT-3000 (Beryl AX)
• Teltonika Networks RUT955 (100 Mbit only)

Do you have a router model that works and is not listed here? Please leave a comment below!

Most other routers with a WAN port that can be configured as a DHCP client on the WAN port will also work with Starlink. This allows the router to receive an IP address from the Starlink dish and establish a connection to the internet.

However, it is important to note that some routers, such as the FritzBox, block private IP addresses on the WAN port. This can prevent you from connecting to the Starlink dish using the Starlink app on your local network. If you encounter this issue, you may need to configure your router to allow private IP addresses on the WAN port or consider using a different router (see recommended routers in the list above).

When setting up your third-party router with Starlink, ensure that the “bypass mode” is turned off. Bypass mode only benefits users on expensive plans, as these plans provide an actual public IP address. Keeping bypass mode off will ensure proper functionality and compatibility with Starlink for most users.

When using a third-party router with Starlink, you can also utilize a 12V conversion adapter to power the dish directly from a 12V power source, such as an RV or campervans battery or solar panel. This can be especially useful for remote users or those requiring a backup power solution.

Please note that while using a third-party router with Starlink is possible, Starlink does not provide official support for this setup. If you encounter any issues or have questions regarding the configuration of your third-party router, you will need to seek assistance from the router manufacturer or online community forums.

In conclusion, Starlink with a third-party router and a 12/24V conversion adapter can provide users with enhanced flexibility and customization options. Remember to keep the “bypass mode” turned off unless you are on an expensive plan with an actual public IP address. While most routers with a WAN port configured as a DHCP client will work, some routers may block private IP addresses, preventing local access to the Starlink dish. Starlink does not offer support for third-party routers, so you must rely on other resources if you encounter any issues.